Fellside Precision Cutting

Superb quality precision CNC cut balsa & ply parts. Self -jigging construction for quick accurate build. Built up open structure wing. Innovative 1/32" balsa laminated fuselage construction. Hardware included.

Requires:- Preferred Parts List to complete the plane:
Three 5-6g servos
Micro 4 channel receiver
36" version: Razor 350/GWS gearbox, 9 tooth pinion and 70 tooth spur (this motor can be hard to find. An Axi 2212/34, Tornado mini 2212/750 or a Himax 4100 geared 6.6:1 weigh a little more but perform almost as well). 12x6 SF propeller.

30" version: Axi 2208/34 or Axi 2212/26, PJS 550, Tornado mini 2212/1000 or similar motor. 10x4.7 SF propeller.
Castle Creations 10A controller if you get the Razor or the 2208/34, 25A for the others
3 cell 860 pack if you get the Razor or 2208/34, 1320 for the others
2 rolls Solite, Nelson, or Coverite Microlite covering (do not use anything else!)
3M 77 spray glue or equivalent.
Thick CA
Thin CA
CA accelerator
Wheels: two 2" lightweights (I use MPI's)
Hinge tape